Wall Mounted Systems
|
|
 The new SRK INVERTER range combines sophisticated micro-processor energy saving controls with advanced refrigeration technology, applied to small Air Conditioning/ heat pump systems.
|
|
 |
|
The systems will provide cooling or heating, depending on the room condition and the selected temperature. Instead of switching on/off, as dictated by a room thermostat, the output capacity, both heating and cooling, is automatically varied to match the requirement at the time. This saves energy, and provides stable and comfortable temperature conditions.
The major advance in heat pump technology is the new Mitsubishi high efficiency DC-PAM INVERTER compressor.
A typical system consists of an indoor unit mounted at high level on a wall, connected by two small copper pipes to a weatherproof outdoor unit, which can stand on the ground, on wall brackets, or on a flat roof or balcony.
The indoor unit comes with a hand held controller, which is used to switch the unit on/off and to adjust the temperature and fan speed. A 24 hour timer control is included. Alternatively an optional wired controller is available for certain models.
|
|
 |
|
|
|
SRK – Residential and Light Commercial Application
The smaller SRK models are ideal for bedrooms and living rooms, where high temperatures and humidity can create discomfort during the summer. They are also applied to home offices, where computers and other electrical equipment can add to the heat problem in small rooms, especially where there is a need to keep windows locked for security reasons, or to reduce noise disturbance from outside.
SRK systems are used extensively in small offices, restaurants, clubs, and many other light commercial applications. They provide a low cost solution to problems of overheating in summer, and will also provide extremely efficient heating in winter through the heat pump operation.
New High Efficiency DC PAM INVERTER
The prime motivating factor behind the sophisticated development of high efficiency heating and cooling systems, is the rising cost of energy, and the need to reduce carbon emissions. The compressor uses most of the electricity in a system, so this is the focal point for saving energy. The Mitsubishi Pulse Amplitude Modulation Inverter and the new DC compressor, provide the required improvements in efficiencies for both cooling and heating operations. |
|
|
Need help...
If you have an office, shop or restaurant and require some
information or advice about Air Conditioning please
give us a call on 01226 361 950
for a friendly, hassle free, no obligation chat |
|
|
| Further information: |
|
| Key Features |
|
|
|
|
|
|
|
| This system is suitable for: |
|
- Restaurants
- Bars
- Offices
- Server Rooms
- Retail Outlets
- Shops
- Stores
- Hotels
- Gyms
- Treatment Rooms
- Consulting Rooms
- Studios
- Surgeries
|
|
up to 38%
Energy Saving
with Inverter
Technology |
|
